Uni-Pro Cornice Adhesive 2.5 Kg
Uni-Pro Cornice Adhesive Strong Plaster Cement 2.5 Kg For fixing plasterboard and fibrous plaster cornice to plasterboard walls and ceilings. Instruction Before mixing the Uni-Pro Cornice Adhesive, measure the cornice,...
Uni-Pro Cornice Adhesive Strong Plaster Cement 2.5 Kg
For fixing plasterboard and fibrous plaster cornice to plasterboard walls and ceilings.
Before mixing the Uni-Pro Cornice Adhesive, measure the cornice, cut to size and check that cornice fits in position.
Add 3 parts of Cornice Adhesive to approximately 2 parts of clean water and mix to a smooth, creamy consistency. Only mix enough adhesive for 30 minutes usage.
Do not mix too thin as this will reduce adhesion.
Using a blade or broad knife, butter the edges on the cornice and place in position. Hold firmly for a few seconds and support the cornice by nailing if necessary.
Once cornice is in position, flush the edges with the same Uni-Pro Cornice Adhesive.
Finish with a damp sponge, to minimise sanding.
- Made in Australia
- High Strength
- Fast Setting
- Paintable Surface
- Smooth Sanding
- Mix With Water
Buy in boxes and save!
How much paint do I need? Our Paint Calculator is a useful feature that calculates the amount of paint we require for a painting project. We will also soon be adding a feature that will allow you to calculate labour cost for the painting project. Usually for a 3 bedroom unit/house it takes 20L of ceiling paint. In most cases it's flat (for bathroom ceilings it's best to use mould proof or simple low sheen paint, 30 liters for walls usually its low sheen, and 4-6 Litres for woodwork.) Coverage in most cases is around 1L per 7 -10 Square meters, again it's for previously painted surfaces only. For new plasterboard its around 7 squares per 1 L per one coat, and the new render is 5 square meters per liter again for one coat.