Dan's Paint Cosmocoat Dark Colours 15L Range

Dans Paint
Save 11%



Out of stock
Add to Cart
Out of stock
Add to Cart

Payment & Security | Refund Policy

American Express Apple Pay Google Pay Mastercard PayPal Shop Pay Union Pay Visa
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Dan's Paint Cosmocoat Dark Colours 15L Range


Dan's Paint Cosmocoat Dark Colours  is packed full of features, including superior hiding power, excellent coverage, washability, mould-resistant additives, low odour, fast drying times, and low roller spatter, making it excellent value for money. 

Surface preparation:

  • Ensure the surface is clean and dry, free from grease, dirt and dust. All flaking, peeling and loose material must be removed. Cracks and holes should be filled and sanded to an even finish. Sand glossy surfaces to a dull finish and remove dust.
  • If mould is present, clean the surface with household bleach, rinse well with clean water and allow it to dry before further application.
  • Ensure all new concrete and cement surfaces are free from any bond breakers, release agents and curing compounds. Allow surfaces time to fully cure before Cosmocoat is applied.
  • Ensure all metal substrates are clean and free from any contaminants and rust before further application.
  • If a primer, sealer or undercoat is required, Dan’s Paint recommends Cosmocoat 3-in-1 Prep, which is suitable for a wide range of surfaces.


  • Do not apply Cosmocoat Dark Colours when the temperature is below 10° C, above 35°C, when humidity is high, or if rain is imminent.
  • Stir well before and regularly during use with a wide flat stirrer that reaches the bottom of the bucket.
  • Apply two even coats of Cosmocoat Dark Colours by brush, roller or spray. The use of quality brushes and rollers will ensure the best results. Allow a minimum of two hours dry time between coats. 


Cosmocoat Dark Colours will cover approximately 14 square metres per litre depending on substrate porosity, texture and type of application method used.

Drying and re-coating:

Cosmocoat Dark Colours will be touch dry in approximately 30 minutes in normal conditions. Re-coat after a minimum of 2 hours. Dry times will vary in cold or humid conditions.


Cleanup with water. For further information on Cosmocoat Dark Colours, surface preparation, application or other Dan's Paint products, contact PaintAccess' experienced customer service team.



  • Durable and Washable
  • Premium Product
  • Self-priming
  • Mould Resistant
  • Low VOC
  • Easy to spray
  • Interior and Exterior
  • Great Coverage
  • Low Sheen 
  • White Tintable
  • For fences and roofs