Drizoro MAXSEAL FOUNDATION waterproof coating Kit Brush & Mixer
A heavy cement based waterproof coating that provides protection and waterproofing to below grade concrete, brick, masonry as a two-coat system. Can also be used as a base coat for...
A heavy cement based waterproof coating that provides protection and waterproofing to below grade concrete, brick, masonry as a two-coat system. Can also be used as a base coat for other Drizoro coatings. Has high resistance to aggressive water.
Coverage: 1kg per square meter per coat.
Waterproofing of retaining walls, car parks, basements, elevator pits, below grade ingress of water in foundations. It can also be used as waterproofing layer or barrier against humidity by capillarity on a variety of mortar substrates.
• Good adhesion, it becomes part of the substrate, fills and seals all pores, missing mortar lines etc.
• Must be applied to wet surfaces
• Can be sprayed by airless sprayer (3 to 5mm tip)
• Can be rendered or painted over.
• NOT affected by salts and acids in soil.
• Easy to apply with Drizoro brush. Will seal against positive and negative water pressure
How much paint do I need? Our Paint Calculator is a useful feature that calculates the amount of paint we require for a painting project. We will also soon be adding a feature that will allow you to calculate labour cost for the painting project. Usually for a 3 bedroom unit/house it takes 20L of ceiling paint. In most cases it's flat (for bathroom ceilings it's best to use mould proof or simple low sheen paint, 30 liters for walls usually its low sheen, and 4-6 Litres for woodwork.) Coverage in most cases is around 1L per 7 -10 Square meters, again it's for previously painted surfaces only. For new plasterboard its around 7 squares per 1 L per one coat, and the new render is 5 square meters per liter again for one coat.