Earl’s Graffiti Protection Range

• Graffiti Barrier

Before being attacked, bring in the defense

With Earl’s Graffiti management system, surfaces are protected with GRAFFITI BARRIER. This is a non harmful, sacrificial protective barrier coat applied to surfaces that may become the target for graffiti. It is a unique blend that will dry opaque.

Suitable for domestic or commercial property for surfaces such as bricks, cement render, timber fences, stone, garage doors and metal, etc.

- Application instructions:

Apply Earl’s Graffiti Barrier coat sparingly to the surface with a roller or brush. Use roller direction once only.

One litre covers approximately 6 square metres on render or dark surfaces. Try a small area first to ensure it does not dull the surface. For best results, do not use in cold weather below 12 ̊c. Shake well and stir, see tub for more details.

• Graffiti Remover

Already been targeted? Repel it with an attack

After using Earl’s Graffiti Barrier to protect a surface (see step below if Earl’s Graffiti Barrier not used) proceed with the removal of graffiti with Earl’s Graffiti Remover – an environmentally friendly, non caustic graffiti remover that dissolves graffiti. The dissolved graffiti can be hosed off with water.

No defence? There is hope.  Earl’s Graffiti Remover is a non-caustic heavy duty graffiti remover designed for removing graffiti from most surfaces including bricks, cement render, timber fences, stone and metal without the need to barrier coat the affected surface.

Suitable for domestic or commercial property for surfaces such as bricks, cement render, timber fences, stone, garage doors and metal signs, etc.

- Application instructions:

For unpainted surfaces, spray Graffiti Remover directly onto graffiti and allow to dissolve, then scrub with a stiff bristle brush and wash off with water.

Areas where graffiti is deeply imbedded may require a second application.