Rust-Oleum Chalk board Paint 887ml

Rust-Oleum Chalk board Paint 887ml

$20.00
financing available

or 4 payments of $5.00 AUD with Afterpay Info

$27.50

or 4 payments of $5.00 AUD with Afterpay Info

Rust-Oleum Chalk Board Brush-on Paint 887ml Rust-Oleum© Specialty Chalk Board converts surfaces into a usable chalkboard. Apply to metal, wood, masonry, drywall, plaster, glass, concrete, un-glazed ceramics and hardboard.  ...
financing available

or 4 payments of $5.00 AUD with Afterpay Info

Rust-Oleum Chalk Board Brush-on Paint 887ml

Rust-Oleum© Specialty Chalk Board converts surfaces into a usable chalkboard. Apply to metal, wood, masonry, drywall, plaster, glass, concrete, un-glazed ceramics and hardboard.

 

  • Cleans with soap and water
  • Erases cleanly
  • Indoor use only

FOR BEST RESULTS

Allow first coat to dry for 4 hours before applying second coat. After 3 days, the chalkboard finish is ready for use. Once cured, prepare surface for chalk by rubbing side of chalk over entire surface and erasing. This will leave a coat of chalk dust that will provide the best erasability. Chalkboard can be wiped clean with a damp cloth. Wait 7 days after painting before wiping it down.

 

AVAILABLE SIZES

  • 887 mL

Use Rust-Oleum Chalkboard brush on to create a black chalk board.

 

You Need:

Rust-Oleum Chalkboard Brush-on Paint

Foam roller

Masking tape

Sandpaper

How To:

1. Lightly sand and clean the surface that is to be painted. Allow to fully dry.

2. Tape off the area you would like to paint.

3. Read instructions on the box carefully on how to apply the paint.

4. Allow the surface to cure for at least 2 days before using any chalk.

TIP: Use Rust-Oleum Magnetic Primer underneath to turn it into a magnetic whiteboard

 

Technical Data

How much paint do I need? Our Paint Calculator is a useful feature that calculates the amount of paint we require for a painting project. We will also soon be adding a feature that will allow you to calculate labour cost for the painting project.  Usually for a 3 bedroom unit/house it takes 20L of ceiling paint. In most cases it's flat (for bathroom ceilings it's best to use mould proof or simple low sheen paint, 30 liters for walls usually its low sheen, and 4-6 Litres for woodwork.) Coverage in most cases is around 1L per 7 -10 Square meters, again it's for previously painted surfaces only. For new plasterboard its around 7 squares per 1 L per one coat, and the new render is 5 square meters per liter again for one coat.

room

Paint Calculator

room

SHOP

PRICE

Related Product

params.svg
Panel Tool
Float header
Float topbar
Default Boxed Large