Sikkens Cetol HLSe 1 Litre

Sikkens Cetol HLSe 1 Litre

$50.60
financing available

or 4 payments of $12.65 AUD with Afterpay Info

or 4 payments of $12.65 AUD with Afterpay Info

SIKKENS CETOL HLSE 1 Litre *1 Litre Cetol HLSe not available in Silver Grey  Sikkens Cetol HLSe is a weather resistant, transparent and highly water-repellent, stand-alone 3 coat system for exterior timber decoration...
financing available

or 4 payments of $12.65 AUD with Afterpay Info

SIKKENS CETOL HLSE 1 Litre

*1 Litre Cetol HLSe not available in Silver Grey 

Sikkens Cetol HLSe is a weather resistant, transparent and highly water-repellent, stand-alone 3 coat system for exterior timber decoration and protection. Perfect for decking, roof shingles, and outdoor furniture.

It can also be used as a base coat under other Sikkens products such as: Sikkens Cetol Filter 7 plus, Cetol Supernatural, Sikkens Cetol Deck, Sikkens Cetol Deck Slip Resistant, or Sikkens Cetol TGL Gloss plus. 

  • The stain repels unwanted moisture but still allows the timber to breathe due to its micro-porous structure
  • The wood grains remain natural and visible after application
  • Long-lasting UV and weather resistance
  • Resistant to mould, blistering and peeling
  • Can also be used as an interior timber coating (but only in well-ventilated areas)
  • Easy application and simple maintenance
  • Dries in a satin finish

 

Applications:

Cetol HLSe can be used as a Finishing coat on the following applications: Exterior softwood and hardwood timber such as outdoor stairs and walks, decks, and outdoor furniture. 

Cetol HLSe can be used as a Base coat on the following applications: Exterior softwood and hardwood fascia boards, cladding, doors and gates, and other timber joinery.

 

Coverage:

Smooth planed timber surfaces: approximately 12 to 16 sqm. per litre

Rough, sawn wood surfaces: approximately 4 to 8 sqm. per litre

 

Number of Coats:

For a Finishing coat, 3 coats is recommended.

Only 1 coat is needed if to be used as a base coat or primer.

 

Preparation

Prior to coating, some new or unseasoned hardwood contain natural tannins that need to be extracted. Some of these hardwoods are Spotted Gum, Jarrah, Merbau/Kwila, Ironbark, and Tallowwood.

These tannins can be extracted naturally over a period of 3-6 months depending on sunlight and other weather exposure. But you can accelerate this process by using Sikkens Cetol Tannin & Oil Remover and then followed by Sikkens Cetol Deck & Wood Cleaner.

 

Clean Up:

Since this is an oil-based product, Mineral Turps are recommended for cleaning up any surfaces or tools. 

 

Pack Sizes we sell in:

1, 5, and 10 litres

100ml sample pot, 500ml, and 20 Litre only available upon special request (additional fees apply as we do not keep stock of these units)

1 Litre pots not available in Silver Grey

 

How much paint do I need? Our Paint Calculator is a useful feature that calculates the amount of paint we require for a painting project. We will also soon be adding a feature that will allow you to calculate labour cost for the painting project.  Usually for a 3 bedroom unit/house it takes 20L of ceiling paint. In most cases it's flat (for bathroom ceilings it's best to use mould proof or simple low sheen paint, 30 liters for walls usually its low sheen, and 4-6 Litres for woodwork.) Coverage in most cases is around 1L per 7 -10 Square meters, again it's for previously painted surfaces only. For new plasterboard its around 7 squares per 1 L per one coat, and the new render is 5 square meters per liter again for one coat.

Paint Calculator
room
room

SHOP

PRICE

PaintAccess $50.60

Customer Reviews

Based on 1 review Write a review

Related Product

params.svg
Panel Tool
Float header
Float topbar
Default Boxed Large