Sikkens Cetol HLSe 10L Decking Oil

Sikkens Cetol HLSe 10L Decking Oil

$370.59
financing available

or 4 payments of $92.65 AUD with Afterpay Info

or 4 payments of $92.65 AUD with Afterpay Info

SIKKENS CETOL HLSE 10 Litres Sikkens Cetol HLSe is a weather resistant, transparent and highly water-repellent, stand-alone 3 coat system for exterior timber decoration and protection. Perfect for decking, roof shingles, and...
financing available

or 4 payments of $92.65 AUD with Afterpay Info

SIKKENS CETOL HLSE 10 Litres

Sikkens Cetol HLSe is a weather resistant, transparent and highly water-repellent, stand-alone 3 coat system for exterior timber decoration and protection. Perfect for decking, roof shingles, and outdoor furniture.

It can also be used as a base coat under other Sikkens products such as: Sikkens Cetol Filter 7 plus, Cetol Supernatural, Sikkens Cetol Deck, Sikkens Cetol Deck Slip Resistant, or Sikkens Cetol TGL Gloss plus. 

  • The stain repels unwanted moisture but still allows the timber to breathe due to its micro-porous structure
  • The wood grains remain natural and visible after application
  • Long-lasting UV and weather resistance
  • Resistant to mould, blistering and peeling
  • Can also be used as an interior timber coating (but only in well-ventilated areas)
  • Easy application and simple maintenance
  • Dries in a satin finish

 

Applications:

Cetol HLSe can be used as a Finishing coat on the following applications: Exterior softwood and hardwood timber such as outdoor stairs and walks, decks, and outdoor furniture. 

Cetol HLSe can be used as a Base coat on the following applications: Exterior softwood and hardwood fascia boards, cladding, doors and gates, and other timber joinery.

 

Coverage:

Smooth planed timber surfaces: approximately 12 to 16 sqm. per litre

Rough, sawn wood surfaces: approximately 4 to 8 sqm. per litre

 

Number of Coats:

For a Finishing coat, 3 coats is recommended.

Only 1 coat is needed if to be used as a base coat or primer.

 

Preparation

Prior to coating, some new or unseasoned hardwood contain natural tannins that need to be extracted. Some of these hardwoods are Spotted Gum, Jarrah, Merbau/Kwila, Ironbark, and Tallowwood.

These tannins can be extracted naturally over a period of 3-6 months depending on sunlight and other weather exposure. But you can accelerate this process by using Sikkens Cetol Tannin & Oil Remover and then followed by Sikkens Cetol Deck & Wood Cleaner.

 

Clean Up:

Since this is an oil-based product, Mineral Turps are recommended for cleaning up any surfaces or tools. 

 

Pack Sizes we sell in:

1, 5, and 10 litres

100ml sample pot, 500ml, and 20 Litre only available upon special request (additional fees apply as we do not keep stock of these units)

1 Litre pots not available in Silver Grey

 

Customer Reviews

No reviews have been published Write a review

Related Product

params.svg
Panel Tool
Float header
Float topbar
Default Boxed Large