Taubmans Endure Semi Gloss White Interior Wall Paint
Good for all interior walls, bathrooms, laundries and high traffic areas. Gloss Level 20-25%
HOW TO APPLY
Clean the surface: Walls should be wiped down with a mild detergent and rinsed clean with water. Even if not dirty. Paint needs a clean surface to adhere to.
Seal new or bare plaster with plaster sealer. Seal bare wallboards.
- Remove all loose or flaking paint
- Wash all areas to remove any surface contamination.
- Treat surfaces affected by mould with chlorine bleach diluted one part bleach to four parts water.
- Rinse clean with fresh water.
- Spot repair any bare areas such as filled holes as per directions for new work.
- Apply two liberal coats by brush, roller or spray.
- Do not overspread.
- Keep brushes and rollers working freely by rinsing occasionally in clean water.
Water wash up, away from drains.
Up to 16m²/litre, depending on nature of surface. Coverage will be lower on rough or absorbent surfaces.
Recoat after 2 hours at 25°C and 50% relative humidity.
Stir paint with a 25mm wide flat stirrer in a circular lifting motion for at least 5 minutes before use. It is always recommended to stir paint before use to ensure that the colour tints are dispersed evenly throughout the paint.
Do not use at temperatures below 10°C, above 35°C or when humidity is excessive.
ASTHMA COUNCIL APPROVED
PROVEN TO DELIVER SUPERIOR PROTECTION* WITH 8-IN-1 MULTI-BENEFIT PROTECTION:
- Wash resistant
- Stain resistant
- Scrub resistant
- Asthma & allergy friendly
- Low VOC & odour
- Inhibits mould & mildew
- Nanoguard technology
ADVANCED NANOGUARD TECHNOLOGY
Improved indoor air quality is a strong feature of the new Endure Interior range, with low odour, and VOC* levels reduced to 16g/1L.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.