Application Process

• Firstly prepare surface 

Clean and dry  the surface. 

Mould needs to be treated with bleach and rinsed with fresh water then. 

All surface defects need to be filled with a suitable filler.

Using masking tape on wall and ceiling paints is not recommended.

•  Applying on new work

Apply Taubmans 3 in 1 once on surfaces such as timber,  masonry and paper faced plasterboard.

•  If surfaces previously painted

All flaking and loose paint need to be removed. Then sand with fine paper surfaces. Prime before paint if it is necessary. Apply Taubmans 3 in 1 to make sure surfaces are even. Undercoat surfaces which were painted before. 

•  Application steps

Check colour before use. 

Applying two coats using a 4mm – 6mm (nap or pile length) roller or brush is recommended. 

Put thin coats as a thick coat will cause runs to appear. 

Use a roller if a large area needs to be painted. 

Mix paint for 5 minutes before use

30 minutes is a Drying time (touch dry)

After 2 hours at 25°C and  4 hours in cold or humid areas Recoat 

•  If temperatures below 10°C Do not paint
• Covered area

Coverage depends on the surface roughness. Up to 16 m2 per litre.