Uni-Pro Cornice Adhesive Strong Plaster Cement 2.5kg
For fixing plasterboard and fibrous plaster cornice to plasterboard walls and ceilings.
Before mixing the Uni-Pro Cornice Adhesive, measure the cornice, cut to size and check that cornice fits in position.
Add 3 parts of Cornice Adhesive to approximately 2 parts of clean water and mix to a smooth, creamy consistency. Only mix enough adhesive for 30 minutes usage.
Do not mix too thin as this will reduce adhesion.
Using a blade or broad knife, butter the edges on the cornice and place in position. Hold firmly for a few seconds and support the cornice by nailing if necessary.
Once cornice is in position, flush the edges with the same Uni-Pro Cornice Adhesive.
Finish with a damp sponge, to minimise sanding.
- Made in Australia
- High Strength
- Fast Setting
- Paintable Surface
- Smooth Sanding
- Mix With Water
Buy in boxes and save!