Uni-Pro Plaster Of Paris Molding Plaster Range - Sold by box

SOLD BY BOX

Uni-Pro Plaster Of Paris Molding Plaster Range

Uni-Pro Plaster of Paris is a fine quality plaster suitable for a wide range of casting and creative applications. It is ideal for producing detailed moulds, casts and decorative pieces, and can be sanded, carved and painted once fully cured.

Ideal For:

• Casting
• Moulding
• Modelling
• Sculpting
• Carving
• Mixing

Mixing Instructions:

The strength and hardness of the plaster are directly related to the amount of water used during mixing.

• For maximum strength, use 70ml of water per 100g of plaster.
• Do not exceed 100ml of water per 100g of plaster, as excess water will reduce density and hardness.
• Measure the required plaster and water before mixing.
• Pour the water into a mixing container, ensuring the container is no more than half full.
• Slowly add the plaster to the water while stirring carefully to minimise air bubbles.
• Mix until a smooth, even consistency is achieved. Do not mix for longer than one minute, as the plaster begins to set quickly.
• Pour the mixture into the mould immediately, tapping or vibrating the mould to help release trapped air bubbles.
• Once the plaster has cooled and hardened, carefully remove it from the mould.
• Full hardness is achieved after approximately 24 hours, after which the plaster can be sanded, carved and painted.

Note:

• It is normal for plaster casts and moulds to become warm during the setting process.

Available Sizes:

• 1kg
• 3kg

Box Quantities:

• 1kg – Box of 10 bags
• 3kg – Box of 4 bags