A wall can need paint, plaster repairs, new render or a decorative mineral finish—and those are four different jobs. A cheap-looking square-metre rate tells you very little until you know which one is being priced, what the surface is like and what the contractor will leave finished.
This Australian pricing guide puts published painting, plastering, rendering and Venetian plaster examples in context. Use it to prepare a budget and ask better questions before accepting a quote. It is not a tariff, a promise of availability or a test of whether a contractor is honest.
Price research checked: 20 November 2026. All amounts are Australian dollars. Figures come from the linked contractor guides and marketplace publications. They are not independently audited completed-job prices or PaintAccess quotes. GST and scope are identified where the source makes them clear; otherwise, ask.
The illustrations are AI-generated images created for PaintAccess, reused here to explain planning and assessment. They do not show actual customers, completed work or quoted projects.
First, identify the work—not just the wall colour
| Work | What you are buying | Clarify before comparing |
|---|---|---|
| Painting | Preparation and a specified coating system on agreed surfaces. | Walls only, or ceilings, doors and trims too? How much repair? |
| Plasterboard repair / plastering | Repairing or forming the surface that will receive decoration. | Patch, re-sheet, joint treatment or whole-surface finish? Who paints afterwards? |
| Rendering | A specified render system on the agreed substrate. | Removal, substrate work, finish coat and painting included or separate? |
| Venetian / polished plaster | A hand-applied decorative finish and its supporting preparation. | Which system, sample, texture, sheen and protective finish? |
If a room has a damaged ceiling, uneven walls and a decorative feature wall, ask for those tasks as separate lines. A painter may handle minor filling while a plasterer carries out larger surface work; confirm the actual division of responsibility. The label “full preparation” should be translated into specific tasks.
Per square metre, hourly or daily: compare the unit first
A rate per m² needs a defined measurement basis. It might refer to wall surface, ceilings, a particular finish or a contractor’s package calculation. A labour-only figure cannot be compared directly with supply-and-apply. A room price needs the same clarity: what happens to the ceiling, skirtings and door?
An hourly rate should identify who is working, what is chargeable and whether materials, travel or equipment are additional. For a day rate, ask how many paid hours and how many people are included. A contractor’s charge covers a business service; it is not the same as an employee’s wage.
We Paint — Melbourne guide, 1 April 2026 publishes a Melbourne painter reference of $75–$95 per hour. For illustration only, multiplying that by eight chargeable hours gives $600–$760 for one person. That arithmetic is not a published day-rate offer and does not establish materials, GST, productivity or the price of your job.
For a fixed quote, request the completed scope rather than trying to reconstruct the contractor’s wage. Ask how additional work is authorised and priced. Drying time between visits is also different from paid application time: a job spanning several days is not necessarily several full labour days.
Painting costs: useful examples, not a national price list
For bedroom-count budgets and interior/exterior project examples, see our house painting cost guide for Sydney and Melbourne. Here the focus is the difference between surface rates and trade packages.
| Published example | Rate | Scope described by source |
|---|---|---|
| Interior plasterboard in sound condition | $18–$35/m² | Two finish coats, routine preparation, one colour. |
| Interior walls needing more preparation | $30–$55/m² | Patching, sanding and priming before two coats. |
| Single-storey exterior render / masonry painting | $25–$50/m² | Cleaning, crack filling, primer and two coats. |
Source: Perfection Coating — Melbourne painting guide, labelled 2026. These are one contractor’s indicative Melbourne figures. GST is not explicit in the cited rate table. Confirm the treatment of openings, trims, repairs and access. The exterior row is painting existing render, not applying a new render system.
For a different project basis, Prisma Coatings — Sydney guide, 10 February 2026 gives $3,500–$7,000+ for a three-bedroom interior. The source’s estimate does not settle every inclusion or GST treatment. It cannot be divided by an assumed floor area to create a reliable wall-painting rate, or compared with another city’s broader package as proof that one city is cheaper.
Plastering costs: a small patch is not a miniature whole-house job
Ask whether the price is for hanging board, setting joints, skim coating an existing surface, solid plaster or repairing a defined damaged section. “Plastering” alone does not specify the result. A surface handed over ready for a painter still needs the agreed coating work; do not assume painting is included.
| Job described | Published range | Important boundary |
|---|---|---|
| One hole, up to 200 mm | $290–$480 per job | A small repair package, not a m² installation rate. |
| Repair of a 1 m² water-damaged ceiling section | $600–$2,500 per job | Replacement and finishing of the described damaged section; investigate the water source separately. |
| Wall and ceiling plastering, whole-home work | $25–$45/m² | Measure the wall/ceiling surface; establish the exact assembly and finishing scope. |
Source: Jack’s Plastering — Sydney guide, updated 30 June 2026. The publication describes the repair handover as ready for paint, rather than painted. GST treatment is not explicit in this table; ask for a written breakdown. Small jobs carry setup and attendance costs, so the effective rate per m² can be much higher.
For wider context, Service.com.au — plastering guide, updated 9 November 2026 publishes an indicative $20–$90/m² allowance. Its repair data for the twelve months to October 2026 gives a $500 median for patch/hole/crack quotations, with the middle half at $400–$850. This is the publisher’s platform data, not a national completed-job survey or a guarantee for your repair.
Before approving ceiling work, ask who is assessing the cause, removing damaged material, protecting the room and completing the repaint. A neat new patch does not resolve an active leak. Obtain the appropriate assessment where movement, moisture or the underlying structure is uncertain; a budget table cannot diagnose the building.

Rendering costs: check the finish beyond the base coat
| Work | Published range | GST / comparison note |
|---|---|---|
| Cement rendering | $34–$69/m² | Source states GST included. |
| Acrylic rendering | $46–$80/m² | Source states GST included. |
| Old render removal | $17–$46/m² | A separate preparation item. |
| Painting over new render | $14–$34/m² | A separate coating item. |
Source: Finishing Touch Rendering — Sydney guide, updated 4 November 2026; its rates were checked in October 2026. These are that Sydney business’s published examples. Do not add every line automatically: some jobs retain sound existing render, while others need removal, repair or a different access arrangement. Ask which stages your quote already includes.
As a broader publisher reference, hipages — rendering guide, updated 6 January 2026 lists $30–$50/m² for cement render and around $80/m² for acrylic. GST and a matched project specification are not established by those headline figures. They are a cross-check, not a reason to reject a more detailed local quote.
Get the substrate, repair area, nominated system and final surface written down. Ask whether the job finishes at render, a texture finish or a completed paint system. Access equipment should be priced on its stated basis, which may be a whole-job hire cost rather than a m² charge. Where existing coatings or hollow areas need assessment, agree how findings will affect the scope before work starts.
Venetian plaster costs—and why decorative finishes need their own quote
A smooth painted wall, a matte mineral finish and a highly polished marble-look wall are different specifications. Choose the sample and system first, then compare the price to deliver that result. A marble effect is not the supply and installation of natural stone slabs.
| Finish | Published installed range | Scope note |
|---|---|---|
| Matte Marmorino / lime finish | $160–$190/m² | Confirm substrate preparation and approved sample. |
| Polished Venetian finish | $200–$250/m² | Different application/finishing work from a matte system. |
| Microcement, non-wet-area walls | $200–$250/m² | A separate finish category; not a shower-system quote. |
Source: Golden Line Rendering — Melbourne guide, labelled 2026. The guide describes its Venetian pricing as including materials, preparation and application, but also identifies additional work for difficult substrates. GST is not explicit. Get your preparation scope confirmed rather than assuming every repair is included.
A separate published reference, Limestone Artisan — Venetian plaster FAQ, publication date not stated, states $120–$250/m² plus GST for its standard non-wet-area Venetian work. Its publication date and full preparation scope are not stated; this is a live-listed reference checked on 20 November, not a verified November market update.
For a feature wall, request a total including setup, sample approval, edges, junctions and any protective finish. A very small area may have a minimum project charge. For wet areas, ask for the specific suitable system and responsibilities; a decorative finish or sealer description alone is not evidence that the complete construction meets its requirements.
Sydney, Melbourne and the rest of Australia: what changes?
Location matters, but the available examples do not support a single reliable city multiplier. They are different businesses quoting different scopes. A national guide, a Melbourne decorative wall and a Sydney repair visit should not be blended into an “Australian average”.
For Brisbane, Perth, Adelaide or a regional property, request local quotes for the same written brief. Ask about travel, access, scheduling and minimum attendance rather than assuming a regional job is automatically cheaper. Within a city, a difficult stairwell or occupied apartment can be a more useful pricing detail than the suburb’s reputation.
Tell the contractor about parking, lift bookings, building-management requirements, working hours, access to water and power, and whether people will remain at home. Ask which of those constraints affect your quote. These details also help distinguish genuine additional work from an unexplained difference in the headline price.
Measure the surface, not the property listing
A house advertised as 150 m² does not have 150 m² of walls. For a simple rectangular room, start with perimeter multiplied by wall height, then deal with openings according to the agreed measuring rule. Measure the ceiling separately. Doors, trims, reveals and detailed edges may have their own units.
Illustration: a room 4 m by 3 m with 2.4 m walls has a 14 m perimeter. Its gross wall area is 14 × 2.4 = 33.6 m², before any agreed deductions. Its ceiling is 12 m². Its floor area is also 12 m², but that is not the wall area. This is geometry, not a quoted job or a rule for every contractor’s measurement method.
Ask whether openings are deducted and how jambs or reveals are treated. Then check that every quote uses the same basis. If one rate is for two finish coats, multiplying the quoted area by two again would double-count that part of the job. Material coverage calculations and professional application prices are separate things.
Compare the complete quote before deciding what is expensive
| Ask about | A useful written answer |
|---|---|
| Surface and measurement | Rooms/elevations, dimensions, inclusions and measuring rule. |
| Preparation and repairs | Specific tasks and quantities, plus what is excluded. |
| Products and finish | Named system, coats, colour/sheens or approved decorative sample. |
| Labour and materials | All-in or separate; crew and chargeable hours if time-based. |
| Access and protection | Equipment, masking, furniture, occupants and cleanup. |
| GST and final price | Explicit tax basis and comparable complete totals. |
| Variations and handover | How changes are agreed, payment stages, inspection and outstanding work. |
A low price is a reason to clarify the scope, not proof of dishonesty. A high price is not proof of quality. Look for an understandable written offer, relevant examples of work, a clear business identity and an explanation of any assumptions. Read our painting quote comparison guide for a more detailed checklist.
Before paying, check the current rules that apply to your state and type of work. Requirements for contracts, licensing, deposits and variations are not identical across all trades or locations. The NSW Government — residential building contracts, updated 29 April 2026 is a useful starting point for NSW residential work; do not apply a contractor’s marketing statement as a national legal rule.
Reduce avoidable cost without cutting out the work you need
Send one consistent brief to the businesses you are comparing. Group suitable repairs into the same visit, confirm access arrangements and agree who moves furniture. Discuss whether a smaller number of colours or a simpler decorative sample would meet your aim. Ask how much those choices change the total rather than assuming a discount.
Keep the necessary preparation visible in the scope. Removing a repair line without understanding its purpose can change the finished job, not just the bill. If a budget is tight, ask for clearly separated stages: for example, essential surface work now and an optional feature finish later. Confirm any extra mobilisation or return-visit cost.
For practical preparation before the painter arrives, use our home preparation checklist. Leave specialist equipment and technical repair decisions to the appropriate operator; a homeowner’s useful contribution is clear access and a clear brief.
A quote brief you can copy
Our property is in [suburb/city]. We need [painting / plaster repair / render / decorative finish] on [defined walls/ceilings/elevations]. Approximate surface area is [m²], measured as [method]. Existing condition is [description], and we can provide photos. The property will be [occupied/vacant], with [access constraints]. Please identify preparation, materials/system, finish, GST, exclusions, any minimum charge and how additional work would be approved.
If using Find a Painter, identify the painting work you need and ask whether the selected business handles associated repairs or can explain the trade handover. Do not assume a general painting profile also offers specialist rendering, Venetian plaster or waterproofing.
Frequently asked questions
How much does painting cost per square metre in Australia?
There is no single reliable national rate for every painting job. The linked Melbourne contractor example lists $18–$35/m² for sound interior plasterboard and $30–$55/m² where more preparation is required. Confirm measurement, inclusions and GST; these are published examples, not PaintAccess quotes.
What does a painter charge per day?
Confirm the contractor’s own day rate, paid hours, crew size and inclusions. The hourly example in this article is not a day-rate offer. A business charge is different from an employee’s wage.
Why can a tiny plaster repair cost hundreds of dollars?
A small repair still requires attendance, protection, materials and finishing. Compare the total for a defined repair and ask whether painting and any additional visit are included.
Is painting included in a rendering quote?
Do not assume it is. Ask where the render scope ends and whether the final coating, access and repairs are separately priced.
How much does Venetian plaster cost?
The cited Melbourne applicator lists $160–$190/m² for matte Marmorino and $200–$250/m² for polished Venetian work. Those examples are not a national tariff. Confirm the sample, preparation, total project charge and GST.
Are Venetian plaster, microcement and real marble the same job?
No. Specify the actual decorative system or stone installation required. Different finishes, substrates and locations need different scopes, especially in wet areas.
Can I compare a m² price with an hourly quote?
Compare the completed scope and estimated total first. An hourly figure needs chargeable hours and inclusions; a m² figure needs its measurement rule and specification. Do not invent a production rate to make them match.
Are the prices in this guide GST-inclusive?
Only where stated. The cited Sydney rendering examples explicitly include GST; the Limestone Artisan non-wet-area reference is plus GST. Where the source does not make tax treatment clear, request it in writing.
Does the cheapest quote mean I will be ripped off?
No. Ask what explains the difference, compare the same scope and check the business and applicable requirements. Neither a low price nor a high price alone establishes honesty or workmanship.
Can PaintAccess help me find a painter in Sydney or Melbourne?
Use the linked Find a Painter city pages to explore business profiles and request a painting quote. Check coverage, availability and the work each business undertakes; specialist plastering or rendering is not assumed.
Sources, dates and how to use these figures
The linked price publications were checked on 20 November 2026. Contractor figures describe their own published scopes; marketplace figures remain the publisher’s estimates or reported platform quotations. We have not independently audited invoices, added an inflation factor, or used these examples to rank cities by cost. None is an offer from PaintAccess or an assurance that a listed painter will quote the same amount.
- Perfection Coating — Melbourne painting guide, labelled 2026
- Prisma Coatings — Sydney guide, 10 February 2026
- We Paint — Melbourne guide, 1 April 2026
- Jack’s Plastering — Sydney guide, updated 30 June 2026
- Service.com.au — plastering guide, updated 9 November 2026
- Finishing Touch Rendering — Sydney guide, updated 4 November 2026
- hipages — rendering guide, updated 6 January 2026
- Golden Line Rendering — Melbourne guide, labelled 2026
- Limestone Artisan — Venetian plaster FAQ, publication date not stated
- NSW Government — residential building contracts, updated 29 April 2026
For your decision, obtain current local written quotes that state the same surface, preparation, system, access and tax basis. If the available information does not establish an inclusion, ask rather than assuming it. No price guide can substitute for assessing the actual property.